Plain-language guides to emergency management

Search

Disaster Response: Roles, Coordination and the Transition to Recovery

disaster response

Wondering what disaster response actually involves when everything goes wrong? It is the coordinated effort of many agencies to save lives, stabilize an incident and protect property and the environment, organized through shared systems like NIMS.

Item Value
NIMS Command and Coordination structures Four structures (ICS, EOC, MAC Group and JIS)
Mission areas in the National Preparedness System 5 mission areas
Core capabilities in the Response mission area 15 core capabilities
Segments of the National Preparedness System 6 segments

These figures come from a FEMA training lesson on NIMS structures and the U.S. Fire Administration’s National Preparedness System page. Government guidance gets revised, so check the source before you rely on them.

What disaster response covers

Communities across the nation face a diverse set of threats, hazards and events, and the size, frequency, complexity and scope of each one vary. The U.S. Fire Administration notes that all of them draw in a range of personnel and organizations working to save lives, stabilize the incident and protect property and the environment.

The National Response Framework is the national guide for this work. The EPA’s overview describes it as a guide to how the Nation responds to all types of disasters and emergencies, built on NIMS concepts that align key roles and responsibilities.

A typical response has several layers working at once:

  • On-scene command that organizes responders and tasks.
  • Coordination centers and policy groups that support the scene.
  • Public information that keeps residents and stakeholders informed.
  • Resource sharing between jurisdictions and organizations.
  • A handoff, often overlapping, into recovery.

The National Preparedness System places response among 5 mission areas: Prevention, Protection, Mitigation, Response and Recovery. Because it spans the whole cycle, response is easiest to understand next to emergency preparedness. Inside the Response mission area, it identifies 15 core capabilities that communities plan for after a catastrophic incident, and the system itself is made up of 6 segments.

disaster response Responder closeup
A helmeted responder in orange faces another responder in the foreground.

How the incident command system organizes responders

At the scene, the incident command system gives responders from different organizations one shared way to work. The U.S. Fire Administration says NIMS supports the characteristics that make this possible:

  • Unity of effort
  • Common terminology
  • Organizational structures
  • Span of control
  • Transfer of command
  • Chain of command

Common terminology matters because responders from many organizations must understand each other without translating jargon. A clear chain of command and a defined span of control keep any one person from being overloaded.

FEMA’s NIMS training lesson explains that ICS and emergency operations centers are two of the four NIMS Command and Coordination structures. Elected and appointed officials operate at the policy level of incident management, which keeps them distinct from the Incident Commander on scene.

Where coordination happens beyond the scene

An emergency operations center is the off-scene counterpart to command at the incident. The FEMA lesson notes that the public information officer is a key member of ICS and EOC organizations, though the title may differ in an EOC.

A Multiagency Coordination Group, or MAC Group, sits above both. Its members are typically agency administrators, executives or their designees from agencies and organizations affected by the incident, and it may also include businesses and volunteer organizations, per the same lesson.

During an incident, MAC Groups do these things:

  • Act as a policy-level body.
  • Support resource prioritization and allocation.
  • Make cooperative multi-agency decisions.
  • Enable decision making among elected and appointed officials and the Incident Commander.

A MAC Group does not perform incident command functions, and it does not take over the primary work of EOCs or dispatch organizations, according to the FEMA material. Think of it as a place where senior leaders align priorities rather than a second command post.

disaster response Protective equipment
Responders in protective clothing gather on a street covered with white foam.

Getting information to the public

The Joint Information System is the fourth NIMS Command and Coordination structure, and it operates across ICS, EOCs and the MAC Group. Per the FEMA lesson, it integrates incident information and public affairs so the public and stakeholders receive consistent, coordinated, accurate, accessible, timely and complete information.

The same lesson describes an ongoing information cycle with four steps:

  1. Gather complete information for the public and other stakeholders.
  2. Verify the information to ensure accuracy.
  3. Coordinate it with other public information personnel in the JIS.
  4. Disseminate consistent, coordinated information to the public and stakeholders.

The Joint Information Center is a central location where public information staff do this work, and an incident normally has a single one, though the JIS can accommodate several if necessary. Readers who want the full picture can read about disaster crisis communication in a dedicated guide.

Communications plans can carry public safety information such as lifesaving measures or evacuation routes, and they belong in training and exercises, says the FEMA lesson. Which protective action fits a given hazard is a separate question, covered under evacuation vs shelter in place.

Scaling up with federal frameworks and mutual aid

The National Response Framework groups capabilities into Emergency Support Functions. The EPA explains that each function has one or two coordinating federal agencies, plus other agencies in supporting roles.

Scale drives how much of the framework is used. A localized flood or tornado might need only a few functions, while a large-scale natural disaster can require every one of them, per the same EPA page.

Most jurisdictions and organizations do not own all the resources they might need for every hazard, according to the U.S. Fire Administration. It adds that NIMS provides 3 ways to manage resources so you can share with and draw on the resources of others, including public, private and volunteer sources.

The National Preparedness System page calls a mutual aid agreement a tool for enhancing resources during a high-demand incident. A dedicated page on mutual aid agreements emergency management covers the topic in more depth.

disaster response Water spray
Helmeted responders stand amid a large cloud of water spray.

When does response give way to recovery?

Recovery has its own national guide. The Interior Department’s summary says the National Disaster Recovery Framework supports long-term recovery after a disaster response under the National Response Framework.

The same page says NDRF activities may be conducted concurrently with response. In other words, the handoff is not a clean line, and recovery planning can begin while response work is still under way.

The framework focuses on how best to restore, redevelop and revitalize the health, social, economic, natural and environmental fabric of impacted communities, per the DOI page. The steps that follow are laid out in the disaster recovery process guide.

Documenting losses is an early part of that shift, and readers can learn how it works in the guide to disaster damage assessment. People who want to help can read how to volunteer after a disaster, and those curious about one state’s approach can explore Washington state emergency management.

Frequently asked questions

Who is in charge during a disaster response?

Show answer

No single person runs everything. On scene, an Incident Commander leads through the chain of command described by the U.S. Fire Administration, while elected officials set policy from a separate level.

What is the difference between an EOC and a MAC Group?

Show answer

An EOC supports the incident with coordination work, while a MAC Group brings senior agency leaders together on priorities. FEMA’s training lesson states that the MAC Group neither commands the incident nor stands in for EOC functions.

Does recovery wait until response is finished?

Show answer

Not necessarily. According to the Interior Department, recovery framework activities can run alongside response efforts.

Why do jurisdictions rely on mutual aid?

Show answer

A single jurisdiction rarely holds every resource that a major hazard demands. The U.S. Fire Administration says they therefore look to community partners and agreements with neighboring jurisdictions or organizations.