Plain-language guides to emergency management

Search

How to Find and Read Washington Tsunami Evacuation Maps

Washington tsunami evacuation maps

Not sure where to go if the ground shakes on the coast? Washington tsunami evacuation maps from the state show your zone, walking routes and travel times; find your town’s map, then practice the route on foot.

This guide is part of our independent coverage of Washington state emergency management, and it is educational, not official guidance.

Item Value
People inside Washington’s tsunami inundation zone at any given time 175,000+ residents and visitors
Washington shoreline exposed to tsunamis 3,000 miles
Newest walk maps on the state’s list Chinook (2026) and Clallam Bay (2026)
Area covered by NVS turn-by-turn routing Long Beach peninsula, Ilwaco and Cape Disappointment
Size of some state brochures 11 x 17 in.
Printer setting for letter-size paper Scale to 50 percent

These figures come from the Washington State Military Department’s Tsunami Resources and Tsunami pages. They can change as maps are updated, so check the source before you rely on them.

What the main tsunami map types show

Washington’s tsunami maps are built from modeling. The state’s Tsunami page says the Emergency Management Division and the Department of Natural Resources develop them from tsunami modeling data. It also says 175,000+ residents and visitors are inside the inundation zone at any given time.

The state groups its products into three types:

  • Pedestrian Evacuation Walk Time maps, which focus on how long it takes to leave on foot.
  • Tsunami Inundation maps, which show the areas modeling says could be flooded.
  • Tsunami Current Velocity maps, produced from the same modeling work.

The National Tsunami Hazard Mitigation Program explains the split this way: inundation maps show coastal areas that may be flooded, while evacuation maps show areas people must leave to avoid harm. Evacuation maps may also include routes and assembly areas, according to the program’s map directory.

The coast is not the only place to look. The state says a tsunami can affect any stretch of Washington’s 3,000 miles of shoreline, and that the Pacific Coast, Strait of Juan de Fuca, Salish Sea, Puget Sound and large lakes are all at risk, as described on its Tsunami page.

Where to find the map for your town

Start with the state’s Tsunami Resources page, which lists walk maps community by community. The list runs from Anacortes and Bellingham to Westport and Raymond, and it includes tribal communities such as La Push, Neah Bay and Taholah.

  1. Find your community in the list of mobile friendly files and open the PDF.
  2. Check the year in brackets after the name. On the state’s list, Bellingham carries 2019 while Chinook and Clallam Bay carry 2026.
  3. For a print-quality copy, look in the full resolution list, though the page warns that ZIP files may not be mobile friendly.
  4. Cross-check your location in the NVS map, covered below.

The federal National Tsunami Hazard Mitigation Program keeps a state-by-state directory that points to Washington’s interactive evacuation and inundation maps and apps. It also notes that new maps are in development for some areas and that all maps are updated as warranted.

How do you read a walk time map?

A walk time map answers two questions at once. According to the state, it shows how long it would take to leave the inundation zone on foot and how long the first tsunami wave is estimated to take to arrive, as explained on the Tsunami Resources page.

A simple reading order helps:

  1. Locate the places you spend time: home, work, school.
  2. Check whether each one sits inside the zone boundary.
  3. Trace the shortest route out of the zone toward high ground.
  4. Compare the walking time with the estimated wave arrival time.

The state recommends using these maps to learn routes ahead of time for home, work and school. Walking the route once, before you ever need it, shows you where a hill, stairway or trail actually starts.

Washington tsunami evacuation maps Mountain shoreline
A small aircraft flies above gray water with snowy mountains in the distance.

Using the NVS website and app

The NVS Tsunami Evacuation Zones viewer covers many Washington communities and links to brochures and walk time files. Its legend marks evacuation routes, safety destinations, assembly areas, tsunami warning sirens and vertical evacuation structures.

On the state’s Tsunami Resources page, the website lets you drop place markers for your home, work or school and get turn by turn directions to the nearest identified high ground along the road and trail network. It also gives a recommended evacuation time and pace.

Know the limits before you depend on routing, as the same page lists them:

  • Routing works in the web version, not in the phone app.
  • It covers only the Long Beach peninsula, Ilwaco and Cape Disappointment.
  • It follows established roads and trails, which may not be the most direct path to high ground.
  • Routes may become blocked by post-earthquake hazards.

The app still has a role. The state’s page says that installing it on an Apple or Android device enables tsunami alert push notifications and quick access to local evacuation maps.

Paper brochures: handy, but check the date

Brochures are single sheets that show inundation extent, evacuation routes and points of interest, according to the state’s resources page. Some are tabloid-size (11 x 17 in.), and you can print them on letter-size paper by telling your printer to scale to 50 percent.

The state warns that the brochures have not been updated as new modeling was published, nor have their contact details. It asks readers to compare a brochure’s publish date with other inundation and evacuation maps for the same place.

The page gives an example: the Neah Bay and Vicinity brochure from 2012 is partially superseded by the Neah Bay (2024) walk map, as shown on the Tsunami Resources page. If the two differ and you have questions, the state says to contact WA DNR.

If your area has no official map

Not every community has a walk map yet. The state’s page says to contact your local emergency management for advice on the best routes, and that more maps are being worked on and will be released as they are completed, per Tsunami Resources.

The state’s Tsunami page also suggests learning whether you live, work or spend time in an inundation zone, and knowing where the closest high ground is. It adds that ground shaking may be your first, best and potentially only warning.

For background on the shaking that can come first, see our guide to Washington earthquake risk. Landslides and underwater volcanic eruptions can also generate tsunamis, so our overview of Washington volcano hazards is a useful companion read.

Frequently asked questions

Is an inundation map the same as an evacuation map?

Show answer

No. One is a model of where tsunami water could reach; the other turns that into the areas people should leave, sometimes adding routes and assembly points, as the national program describes.

Can I get walking directions in the NVS phone app?

Show answer

The state says the app does not offer the routing feature, so use the website in a browser instead. Even there, routing is limited to a small part of the southwest coast, per the Tsunami Resources page.

Does every Washington town have a walk time map?

Show answer

No. The state’s list names specific communities and promises more later. Where yours is missing, local emergency management is the contact the state points to.

Should I wait for an official alert before moving?

Show answer

The state’s Tsunami page says not to wait for an official alert or other instructions once natural warning signs appear. It advises moving inland to high ground right away.

Why do the maps carry different years?

Show answer

They were published at different times, and the state’s list shows each community’s year in brackets. Prefer the newest map for your location, and compare dates whenever a brochure and a walk map overlap.